Adopting dual air path control and valve core balance design, it is suitable for single component fluids
It has good suction function to ensure quick and clean rubber breakage
01
1、Adjustable stroke, simple maintenance.
2、Not affected by bubbles, broken glue clean, no residue.
3、Tungsten steel striker has good wear resistance and long life.
4、Focus on application: dispensing, potting, filling, marking, dotting.
5、Suitable for fluids: silicone, polyurethane, epoxy resin, lubricants, adhesives, UV glue, ink.
6、Optional dispensing valve switch detection sensor and dilution lubrication kit.
02
| Product model | RV40S |
| Minimum driving pressure | 0.4Mpa |
| Maximum fluid pressure | 80bar |
| Maximum operating frequency | 360cycles/min |
| Drive Component Material | aluminum alloy |
| Fluid Component Material | stainless steel |
| Striker material | tungsten steel |
| Feed aperture | G1/4 female thread |
| Discharge aperture | G1/8 male thread |
| Fixed manner | 2xM3 female thread |
| Appearance size | 30mmx40mmx117.5mm |
| Rubber valve weight | 400g |
