SV40A-Y static valve
SV40A-Y is a needle type structural adhesive valve with dual air path control, suitable for low to high viscosity materials with long operating time, as well as paste like materials with abrasive fillers. It can replace standard static mixing tubes without cleaning
Product characteristics

01

1、Small size, light weight, tungsten steel striker good wear resistance, long life.

2、Disposable static plastic mixing tube, cleaning-free.

3、Wide range of application, large mixing ratio can also achieve ideal mixing effect.

4、Focus on application: dispensing, potting, filling, marking, dotting.

5、Suitable for two-component materials: silicone, polyurethane, epoxy resin, adhesives.

6、Optional valve heating and static mixing heating.

Specification parameters

02

Product model SV40A-Y
Minimum driving pressure 0.4Mpa
Maximum fluid pressure 30bar
Maximum operating frequency 240cycles/min
Drive Component Material aluminum alloy
Fluid Component Material stainless steel
Striker material tungsten steel
Feed aperture G1/4 female thread
Discharge aperture G1/4 male thread
Fixed manner 3xM5 counterbore
Appearance size 145mmx85mmx155mm(Without mixing tubes)
Rubber valve weight 1.25Kg