SV80A static valve
SV80A is a double air path controlled impact needle structural rubber valve, suitable for low viscosity to high viscosity materials with long operating time, as well as paste like materials with abrasive fillers. It can replace standard high flow static mixing tubes without cleaning
Product characteristics

01

1、Small size, light weight, large flow, tungsten steel striker good wear resistance, long life.

2、Disposable static plastic mixing tube, cleaning-free.

3、Wide range of application, large mixing ratio can also achieve ideal mixing effect.

4、Focus on application: dispensing, potting, filling, marking, dotting.

5、Suitable for two-component materials: silicone, polyurethane, epoxy resin, adhesives.

6、Optional valve heating and static mixing heating.

Specification parameters

02

Product model SV80A
Minimum driving pressure 0.4Mpa
Maximum fluid pressure 200bar
Maximum operating frequency 240cycles/min
Drive Component Material aluminum alloy
Fluid Component Material stainless steel
Striker material tungsten steel
Feed aperture G1/2 female thread
Fixed manner 3xM5 counterbore
Appearance size 175 mm x 125 mm x 255mm (without mixing tube)
Rubber valve weight 5Kg