RV60S is a dual air path control backsuction structural rubber valve for medium and high viscosity fluids Application, can accurately dot glue amount.
01
1、Adjustable stroke, simple maintenance.
2、Not affected by bubbles, broken glue clean, no residue.
3、Tungsten steel tie rod has good wear resistance and long service life.
4、Focus on application: dispensing, potting, filling, marking, dotting.
5、Suitable for fluids: silicone, polyurethane, epoxy, lubricants, adhesives, inks.
6、Optional dispensing valve switch detection sensor and dilution lubrication kit.
02
| Product model | RV60MS |
| Minimum driving pressure | 0.4Mpa |
| Maximum fluid pressure | 100bar |
| Maximum operating frequency | 240cycles/min |
| Drive Component Material | aluminum alloy |
| Fluid Component Material | stainless steel |
| Striker material | tungsten steel |
| Feed aperture | G3/8 female thread |
| Discharge aperture | G3/8 male thread |
| Fixed manner | 2xM4 female thread |
| Appearance size | 40mmx60mmx132.5mm |
| Rubber valve weight | 1Kg |
